07990 925 823 david@tyrellmodels.co.uk
0 Items

Modellers Violet Silicone Putty

£11.99

Modellers Violet Silicone Putty is platinum silicone that can be easily mixed and applied by hand. Mix it in equal amounts (1A:1B) by volume. The putty has a pot life of 2.5 minutes with a cure time of 10 minutes. Shrinkage is very low (0.03%) and, when cured, is exceptionally strong and durable (tear strength 6 N/mm). It will resist temperatures up to 150ºC.

5 in stock

SKU: VAP Categories: ,

Modellers Violet Silicone Putty is platinum silicone that can be easily mixed and applied by hand. Mix it in equal amounts (1A:1B) by volume.

The putty has a pot life of 2.5 minutes with a cure time of 10 minutes. Shrinkage is very low (0.03%) and, when cured, is exceptionally strong and durable (tear strength 6 N/mm). It will resist temperatures up to 150ºC.

Modellers that need to make a quick copy of a part or want to duplicate some surface detail on their models will find this material easy to use.

The cure of the silicone putty may be inhibited by certain contaminants in or on the pattern to be moulded, resulting in tackiness at the pattern or a total lack of cure throughout the mould. Wear vinyl gloves only since Latex gloves will inhibit the cure of the rubber. Also, tin-cure silicone, sulphur clays, certain wood surfaces, newly cast polyester resin, epoxy or urethane rubber may cause inhibition.

A small-scale test is recommended if compatibility between the silicone rubber and the surface is a concern. Apply a small amount onto a non-critical area of the pattern. Inhibition occurs if the rubber is gummy or uncured after the cure time has passed.

Reviews

There are no reviews yet.

Be the first to review “Modellers Violet Silicone Putty”

Your email address will not be published. Required fields are marked *